View ED050SC3_4785483.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

E D050S C 3
V ers ion: 2.0
T E CHNICA L MODE L
Please contact PV I or its agent for further information
SPE CIFICA T ION NO. : E D050SC3
T he content of this information is subject to be changed without notice.
Customer*s Confirmation
Customer
Date
By
PV I*s Confirmation
FOR MORE INFORMATION:
AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com
Confirmed B y Prepared B y
T he information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o., Ltd.P AG E :1
ED050SC3
Revision History
Rev. 1.0 Issued Date August.15.2008 Revised New Add Page 7 6-2) Absolute maximum rating Page 16 11.Bar Code definition Page 17 12.Border definition Modify Page 4 3. Mechanical Specifications Page 7 6-3) Panel DC characteristics Page 9 7.Power on sequence 2.0 October.7.2008 Page 14 9. Handling, Safety and Environment Requirements Del Preliminary specification Page 15 10.Reliability test 14.Stylus Tapping Top R:0.4mm Load: 300gf Speed: 5 times/sec Total 13,500times change to Top R:0.8mm Load: 300gf Speed: 2 times/sec Total 13,500times Del Page 13 Note 8-1 Contents
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2
ED050SC3
TECHNICAL
SPECIFICATION
CONTENTS
NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
ITEM
Cover Revision History Contents Application Features Mechanical Specifications Mechanical Drawing of EPD module Input/Output Terminals Electrical Characteristics Power on Sequence Optical Characteristics Handling, Safety and Environment Requirements Reliability test Bar Code Definition Border Definition Block Diagram Packing
PAGE
1 2 3 4 4 4 5 6 7 10 12 14 15 16 17 17 18
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3
ED050SC3 1. Application The display is a TFT active matrix electrophoretic display, with associated interface and control logic, and a reference system design. The 5" active area contains 800x600 pixels, and has full 1~4 bit display capabilities An integrated circuit containing interface, timing and control logic is supplied with each panel.
2. Features High contrast TFT electrophoretic 800x600 display High reflectance Ultra wide viewing angle Ultra low power consumption Pure reflective mode Bi-stable Commercial temperature range Landscape, portrait mode Antiglare hard-coated front-surface
3. Mechanical Specifications
Parameter Screen Size Display Resolution Active Area Pixel Pitch Pixel Configuration Outline Dimension Module Weight Specifications 5 800 (H) 600(V) 101.6 (H) 76.2 (V) 0.127(H)x0.127(V) Rectangle 114.6(H) 89.6(V) 1.18(D) (panel area height) 114.6(H) 89.6(V) 2.0(D) (FPC area height with capacitor) 24 2 Unit Inch Pixel mm mm Remark
mm g
Panel height is measured without released film
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4
ED050SC3 4. Mechanical Drawing of EPD Module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5
ED050SC3 5. Input/Output Terminals 5-1)Pinout List
Pin # Signal Description
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
VNEG NC VPOS NC VSS NC VDD XCL XLE XOE XSHR XSTL2 D0 D1 D2 D3 D4 D5 D6 D7 NC VCOM NC VGG NC VEE NC MODE2 MODE1 XRL SPV CKV BORDER
Negative power supply source driver NO Connection Positive power supply source driver NO Connection Ground NO Connection Digital power supply drivers Clock source driver Latch enable source driver Output enable source driver Shift direction source driver Start pulse source driver Data signal source driver Data signal source driver Data signal source driver Data signal source driver Data signal source driver Data signal source driver Data signal source driver Data signal source driver NO Connection Common connection NO Connection Positive power supply gate driver NO Connection
Negative power supply gate driver
NO Connection Output mode selection gate driver Output mode selection gate driver Shift direction gate driver Start pulse 1st gate driver Clock 1st gate driver Border connection
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6
ED050SC3 6.Electrical Characteristics 6-1) Panel interface description
This panel is driven by ASIC PVI-6001A or "Apollo" display controller ASIC. See control product specification for details.
6-2) Absolute maximum rating
Parameter Logic Supply Voltage Positive Supply Voltage Negative Supply Voltage Max .Drive Voltage Range Supply Voltage Supply Voltage Supply Range Operating Temp. Range Storage Temperature Symbol VDD VPOS VNEG VPOS - VNEG VGG VEE VGG-VEE TOTR TSTG Rating -0.3 to +7 -0.3 to +18 +0.3 to -18 36 -0.3 to +45 -25.0 to +0.3 -0.3 to +45 0 to +50 -25 to +70 Unit V V V V V V V
6-3) Panel DC characteristics
Parameter Signal ground Logic Voltage supply Gate Negative supply Gate Positive supply Source Negative supply Source Positive supply Border supply Asymmetry source Common voltage Maximum power panel Standby power panel Typical power panel Operating temperature Storage temperature Maximum image update time at 25 Symbol VSS VDD IVDD VEE IEE VGG IGG VNEG INEG VPOS IPOS VBorder VAsym VCOM ICOM PMAX PSTBY PTYP VPOS = 15V VPOS = 15V VNEG = -15V VPOS+VNEG VNEG = -15V VGG = 22V VEE =-20V VDD=3.3V Conditions Min 3.0 -21 21 -15.4 14.6 14.6 -15.4 -800 -2.5 0 -25 Typ 0 3.3 0.5 -20 5 22 1.4 -15 22 15 24 15 -15 0 Adjusted 0.25 850 1000 Max 3.6 1 -19 15 23 4.2 -14.6 44 15.4 48 15.4 -14.6 800 -1.0 1850 0.4 50 70 ms Unit V V mA V mA V mA V mA V mA V V mV V mA mW mW mW
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7
ED050SC3
The maximum power and maximum currents are specified for the worse case power consumption. This occurs when 2 horizontal inverted stripped images are displayed The typical power is the consumed power when "typical images" are displayed. The standby power is the consumed power when the panel controller is in standby mode. The listed electrical/optical characteristics are only guaranteed under the controller & waveform provided by PVI - Vcom is recommended to be set in the range of assigned value 0.1V
6-4 )Panel AC characteristics
VDD=3.0V to 3.6V, unless otherwise specified. Parameter Clock frequency Minimum "L" clock pulse width Clock rise time Clock fall time Data setup time Data hold time Pulse rise time Pulse fall time Clock CL cycle time D0 .. D7, SPH setup time D0 .. D7, SPH LE LE LE on off hold time delay time delay time Symbol fckv twL trckv tfckv tSU tH trspv tfspv tcy tsu th tLEdly tLEw tLEoff Min. 0.5 100 100 50 8 1 40 40 40 Typ. Max. 200 100 100 100 100 DC Unit kHz us ns ns ns ns ns ns ns ns ns ns ns ns Below table CKV, SPV SPV CKV App Pin
high-level pulse width
CLOCK & DATA TIMING
CL tLEdly LE tLE tLEoff
tOUT OUT1 ~ OUT400
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8
ED050SC3
OUTPUT LATCH CONTROL SIGNALS
SPH 10% tstls tstlh 10%
CL tcy 90% D0~D7 10% 90% 10%
tsu
th
tfckv
twl
trckv 90
CKV
90
10
10
tus tfspv
th
SPV
trspv 90
90
10
10
6-5) Power Consumption Parameter
Maximum panel power consumption during update. Power consumption in standby mode Typical panel power
Symbol Conditions TYP Max
850 1850 0.4 -
Unit
mW mW mW
Remark
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9
ED050SC3 7.Power on Sequence
1. VSS 2. VEE VDD VNEG VPOS (Source driver)
VGG(Gate driver)
Power on sequence's timing chart as blew :
VGG
VPOS
T1
T2
T3
T4
T5
T6
T7
VDD
VSS
VEE
V NEG
Logic signal input T1: 100 s(min) T2: 0s(min) T3: 1000s (min) T4: 0 s ( min) T5: 0 s (min) T6: 0 s (min) T7: 0 s (min)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10
ED050SC3
It is expanded as blew.
VDD
Sequence
VPOS Sequence
VNEG
Sequence
VEE
Sequence
VGG Sequence
Logic signal input
Sequence
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11
ED050SC3 8. Optical characteristics
8-1)Specifications
Measurements are made with that the illumination is under an angle of 30 degrees, the detection is perpendicular unless otherwise specified. T = 25oC
SYMBOL R Gn CR Tupdate PARAMETER Reflectance Nth Grey Level Contrast Ratio Update time CONDITIONS White 2~4-bit mode 1-bit mode MIN 30 6 TYP. MAX ms ms UNIT % L*
35
DS+(WS-DS) n/(m-1) 1000 540
Note -
WS: White state , DS: Dark state, Gray state from Dark to White :DS m:4 8 16 when 2 3 4 bits mode
G1
G2...
Gn...
Gm-2 WS
8-2)Definition of contrast ratio
The contrast ratio (CR) is the ratio between the reflectance in a full white area (Rl) and the reflectance in a dark area (Rd): CR = Rl/Rd
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12
ED050SC3
8-3)Reflection Ratio
The reflection ratio is expressed as: R = Reflectance Factorwhite board x ( Lcenter / Lwhite board )
Lcenter is the luminance measured at center in a white area (R=G=B=1). Lwhite board is the luminance of a standard white board. Both are measured with equivalent illumination source. The viewing angle shall be no more than 2 degrees.
= declination / = azimuth
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13
ED050SC3 9.HANDLING, SAFETY AND ENVIROMENTAL REQUIREMENTS WARNING
The display glass may break when it is dropped or bumped on a hard surface. Handle with care. Should the display break, do not touch the electrophoretic material. In case of contact with electrophoretic material, wash with water and soap.
CAUTION
The display module should not be exposed to harmful gases, such as acid and alkali gases, which corrode electronic components. Disassembling the display module can cause permanent damage and invalidate the warranty agreements. Observe general precautions that are common to handling delicate electronic components. The glass can break and front surfaces can easily be damaged. Moreover the display is sensitive to static electricity and other rough environmental conditions.
Data sheet status
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14
ED050SC3 10. Reliability test
TEST 1 2 3 4 5 6 7 8 9
High-Temperature Operation Low-Temperature Operation High-Temperature Storage Low-Temperature Storage High-Temperature, High-Humidity Operation High Temperature, High- Humidity Storage Temperature Cycle UV exposure Resistance Package Vibration
CONDITION
T = +50C, RH = 30% for 240 hrs T = 0C for 240 hrs T = +70C, RH=23% for 240 hrs T = -25C for 240 hrs T = +40C, RH = 90% for 168 hrs T = +50 , RH=80% for 240hrs 1 cycle:[-25 30min] [+70 min] :100 cycles 765 W/m for 168hrs,40 1.04G, Frequency: 10~500Hz Direction: X,Y,Z Duration: 1 hours in each direction Drop from height of 122 cm on concrete surface. Drop sequence: 1 corner, 3 edges, 6 faces One drop for each.
2
METHOD
IEC 60 068-2-2Bp IEC 60 068-2-2Ab IEC 60 068-2-2Bp IEC 60 068-2-1Ab IEC 60 068-2-3CA IEC 60 068-2-3CA
REMARK
30
At the end of the test, electric, mechanical, and optical specifications shall be satisfied. At the end of the test, electric, mechanical, and optical specifications shall be satisfied. At the end of the test, electric, mechanical, and optical specifications shall be satisfied. At the end of the test, electric, mechanical, and optical specifications shall be satisfied. At the end of the test, electric, mechanical, specifications shall be satisfied. At the end of the test, electric, mechanical, specifications shall be satisfied. At the end of the test, electric, mechanical, IEC 60 068-2-14 specifications shall be satisfied. IEC60 068-2-5Sa Optical characteristics shall be satisfied.
Full packed for At the end of the test, electric, mechanical, shipment and optical specifications shall be satisfied.
10
Package Drop Impact
Full packed for At the end of the test, electric, mechanical, shipment and optical specifications shall be satisfied.
11
Electrostatic Effect (non-operating)
(Machine model)+/- 250V 0 , 200pF
IEC 62179, IEC At the end of the test, electric, mechanical, 62180 specifications shall be satisfied.
12
Altitude test Operation
700hPa ( = 3000m )48Hr
At the end of the test, electric, mechanical, specifications shall be satisfied.
13
Altitude test Storage
260hPa ( = 10000m )48Hr POLYACETAL Pen: Top R:0.8mm Load: 300gf Speed: 2 times/sec Total 13,500times,
At the end of the test, electric, mechanical, specifications shall be satisfied. Pass criteria - no glass breakage or damage to microcapsules.
14
Stylus Tapping
Actual EMC level to be measured on customer application
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15
ED050SC3 11. Bar Code definition
E0Y 1 1 2 3 4 5 6 7 8 00 2 4 3 01 4 1 2 I 5 6 7 4 2 00361 7 2 A 8 T
EPD model code: ED050SC3:E0Y Internal control codes: FPL reversion code V100:3,V110:4 FPL batch code: (BL/P/B...)001~009:01~99, 100~109:A0~A9, 110-119:B0~B9... 320~329:Z0~Z9 Year: F:2005 / G:2006 / H:2007 / I:2008 /... / Z:2025 Month: 1:Jan. 2:Feb. ... 9:Sep. A:Oct. B:Nov. C:Dec. Serial number MFG code: TOC:T, PVI:P
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16
ED050SC3 12. Border definition
13.Block Diagram
33 PIN Input
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17
ED050SC3 14.Packing
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18

▲Up To Search▲

Price & Availability of ED050SC3

	To Download ED050SC3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .